Manual Netgear ME 101 (page 21 of 25) (English)

519380

Zoom out

Zoom in

1/25

Note: For more troubleshooting information, go to the NETGEAR, Inc. web site.

Symptom

My bridge-enabled

computer could not

communicate with

my wireless-enabled

computer or printer.

The Configuration

Utility cannot see

any bridge even

when I click Browse.

I cannot access the

browser-based

configuration

software.

Cause

This most likely is a

network configuration

problem.

This could be a network

configuration problem or

a hardware connection

problem.

Solution

• Check that the wireless-enabled

computer or printer is on the same

wireless network as the computer

using the bridge.

• Make sure the Network Name

(SSID), WEP key (if WEP is

enabled) and country/region

selection are the same for all

devices connected to the same

wireless network.

• If the computer is connected to a

hub, disconnect all the devices from

the hub and connect the computer

directly to the bridge to see if it

works when directly connected.

• If the wireless LAN setting are

correct, make sure all the devices

are on the same IP network.

• Make sure the crossover cable that

connects your computer and the

bridge is the right cable type.

• Make sure the Ethernet cable

connectors are plugged into the

computer and bridge securely.

• Reset to factory defaults. See

page 15.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Netgear ME 101 in the language / languages: English as an attachment in your email.

The manual is 0,92 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Netgear ME 101 Manual

Product: