Manual Netgear ME 101 (page 10 of 25) (English)

519380

Zoom out

Zoom in

1/25

Installing the Configuration Utility

To configure the bridge you use the configuration utility on the included Resource CD.

Note: To run the configuration utility, you must have the bridge connected using the provided

Ethernet crossover cable to a computer running Windows 98 or 98SE, Me, 2000, or XP —

directly or through a hub. If you have a Macintosh

computer, use the browser-based

configuration procedure on page 12.

1. Insert the Resource CD in a networked computer’s CD-ROM drive.

The NETGEAR software installation utility should start up automatically.

2. Click Install Utility.

3. Follow the instructions on screen to install the ME101 Configuration Utility.

4. Click Finish.

5. Restart the computer.

6. If you had the bridge connected to another device, you must connect it to the computer

where you installed the Configuration Utility.

Note: If the bridge and the computer are connected

to the same hub, you don’t need to directly connect

them.

a. If you had the bridge powered up, unplug it.

b. Connect the provided Ethernet crossover cable

between the computer and the bridge.

c. Plug the power adapter into the bridge and

then plug the power adapter into a power

source.

Default Ethernet AntennaDC in 5V

ME101 Wireless

Ethernet Bridge

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Netgear ME 101 in the language / languages: English as an attachment in your email.

The manual is 0,92 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Netgear ME 101 Manual

Product: