479745
7
Zoom out
Zoom in
Previous page
1/72
Next page
Chapter 1: Connecting to the Internet | 7
Mobile Broadband Wireless-N Router MBRN3000
Table 1. LED and Front Panel Button Descriptions
LED LED Activity Description
Power
Solid green Solid green. Power is supplied to the router.
Solid Red POST (Power-On Self-Test) failure or device malfunction
Off Power is not supplied to the router
Restore Factory Settings
button
Press button for 6 seconds. Power LED lights briefly. When
released, the LED blinks red three times and then turns green
as the gateway resets to the factory defaults.
LAN
(Ethernet)
Solid green The Local port has detected an Ethernet link with a device.
Blinking green Data is being transmitted or received.
Off No link is detected on this port.
USB
Off
No USB device is connected.
An error has occurred with the device.
Solid blue USB device is ready to use.
Blinking blue Data is being transmitted or received.
Internet
Solid green There is an Internet session.
Solid red No Internet connection.
Blinking green Data is being transmitted over the USB port.
Blinking green and red Traffic meter limit has been reached.
Off No Internet connection detected or device in bridged mode.
Wireless
Solid green Indicates that the Wireless port is initialized.
Blinking green Data is being transmitted or received over the wireless link.
Off The Wireless Access Point is turned off.
WPS
Solid green WPS wireless security is being enabled.
Blinking green The device is in the 2-minute interval to synchronize security.
Off WPS is not being set or enabled.
Button Description
Wireless
Turn the wireless radio in the router on and off. The wireless radio is on by default. The
LED located below this button indicates if the wireless radio is on or off.
WPS
Press this button to open a 2-minute window for the router to connect with other
WPS-enabled devices. For more information, about using the WPS method to implement
security, see “Using Push 'N' Connect (WPS) to Configure Your Wireless Network” on
page 19.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear MBRN3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear MBRN3000 in the language / languages: English as an attachment in your email.

The manual is 1,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear MBRN3000

Netgear MBRN3000 User Manual - German - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info