479742
72
Zoom out
Zoom in
Previous page
1/108
Next page
72 | Chapter 5: Advanced
Mobile Broadband 11n Wireless Router MBR1000 User Manual
The LAN TCP/IP Setup parameters are explained in the following table.
DHCP Settings
By default, the router functions as a Dynamic Host Configuration Protocol (DHCP) server,
allowing it to assign IP, DNS server, and default gateway addresses to all computers
connected to the router’s LAN. The assigned default gateway address is the LAN address of
the router. IP addresses is assigned to the attached PCs from a pool of addresses specified
in this screen. Each pool address is tested before it is assigned to avoid duplicate addresses
on the LAN.
For most applications, the default DHCP and TCP/IP settings of the router are satisfactory.
Click the link to the online document
ITCP/IP Networking Basics on page 102 for an
explanation of DHCP and information about how to assign IP addresses for your network.
Use Router as DHCP Server
If another device on your network will be the DHCP server, or if you will manually configure
the network settings of all of your computers, clear the Use Router as DHCP Server check
box on the LAN IP Setup screen. Otherwise, leave it selected.
Specify the pool of IP addresses to be assigned by filling in the Starting IP Address and
Ending IP Address fields. These addresses should be part of the same IP address subnet
as the router’s LAN IP address. Using the default addressing scheme, you should define a
range between 192.168.0.2 and 192.168.0.254, although you might want to save part of the
range for devices with fixed addresses.
Table 15. LAN IP Setup
Settings Description
Device Name
LAN TCP/IP
Setup
IP Address The LAN IP address of the router.
IP Subnet Mask The LAN subnet mask of the router. Combined with the IP address,
the IP subnet mask allows a device to know which other addresses
are local to it, and which must be reached through a gateway or
router.
DHCP Server
For more
information, see
DHCP
Settings on
page 72.
Use Router as a DHCP
Server
This check box is usually selected so that the router functions as a
Dynamic Host Configuration Protocol (DHCP) server. See DHCP
Settings on page 72.
Starting IP Address Specify the start of the range for the pool of IP addresses in the same
subnet as the router.
Ending IP Address Specify the end of the range for the pool of IP addresses in the same
subnet as the router.
Address Reservation
For more information, see DHCP
Settings on page 72.
When you specify a reserved IP address for a computer on the LAN,
that computer receives the same IP address each time it access the
routers DHCP server. Assign reserved IP addresses to servers that
require permanent IP settings.
72


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear MBR1000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear MBR1000 in the language / languages: English as an attachment in your email.

The manual is 2,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info