710570
87
Zoom out
Zoom in
Previous page
1/100
Next page
Verify Normal Behavior With the LED Bars
When you turn on the power on the modem, the Power LED bar, Signal Strength LED bars, and LAN LED
bar light as described here:
1.
When power is first applied, the Power LED bar lights solid amber.
2.
After approximately 12 seconds, the LAN LED bar lights solid green and then goes off again.
3. After approximately 15 seconds, the following occurs:
If the Gigabit Ethernet port is connected to a device over an Ethernet cable, the LAN LED bar lights
solid green.
If the modem detects mobile broadband coverage, the Signal Strength LED bars indicate the
quality of the coverage when the modem is connected to a LTE, 4G, 3G, or 2G mobile broadband
service. Five green bars indicate the strongest signal. One green bar (that is, the shortest bar)
indicates the weakest signal.
The Power LED bar lights solid green.
Troubleshoot With the LED Bars
The following table describes error conditions that are indicated by the LED bars.
Table 8. LED descriptions (error conditions)
DescriptionIcon or LED BarsDesignation
Power LED bar blinks amber fast and individual Signal Strength LED bars light solid
green. For information, see Power LED Bar Blinks Amber Fast and an Individual Signal
and Strength LED Bar Lights Solid Green on page 88.
Power
Off.The modem is not connected to and is not searching for a mobile broadband service.
Individual Signal Strength LED bar lights solid green, other Signal Strength LED
bars are off. For information, see Power LED Bar Blinks Amber Fast and an Individual
Signal and Strength LED Bar Lights Solid Green on page 88.
Signal
Strength
Power LED Bar Is Off
If the Power LED bar is off and other LED bars are also off when you turn on the modem, do the following:
Check that the power On/Off button on the back is in the On position, that is, it is pressed in.
Check that the power cord is correctly connected to your modem and that the power supply adapter is
correctly connected to a functioning power outlet.
Check that you are using the 12 VDC 1.0A power adapter that NETGEAR supplied for this product.
If the error persists, most likely a hardware problem occurred. For recovery instructions or help with a
hardware problem, contact technical support at netgear.com/support.
Alerts and Troubleshooting
87
LTE Modem Model LB2120
87


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear LB2120 4G LTE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear LB2120 4G LTE in the language / languages: English as an attachment in your email.

The manual is 3,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info