710570
26
Zoom out
Zoom in
Previous page
1/100
Next page
Manage Router Mode and Bridge Mode
By default, Router mode is enabled on the modem. By connecting the modem to an Ethernet switch or hub,
you can connect multiple Ethernet devices such as printers, credit card terminals, and computers to the
modem.
In Router mode, Network Address Translation (NAT) is enabled, the built-in Dynamic Host Configuration
Protocol (DHCP) server is enabled to assign a LAN IP address to each connected device, and IP pass-through
(IPPT) is disabled.
In Bridge mode, only a single device can be connected to the Internet through the modem.This device can
be a computer, router, or WiFi router. In Bridge mode, Network Address Translation (NAT) is disabled, the
DHCP server is disabled, and IPPT is enabled.
Because IPPT is enabled in Bridge mode, Bridge mode can be useful for implementing a virtual private
network (VPN), point-to-point, or remote management connection to a single device that is connected to
the modem. Such connections usually require that a public IP address is assigned to the modem’s WAN
port, and through IPPT, to the device that is connected to the modem. For Bridge mode, you can also specify
the LTE netmask.
To change the modem from Router mode to Bridge mode, or the other way around:
1. Launch a web browser from a device that is connected to the modem.
The device can be a computer that is directly connected to the modem or a client from a router that is
connected to the modem.
2. In the address field of your browser, enter http://192.168.5.1.
The limited Dashboard page displays.
3. If you did not select the Remember me check box when you logged in previously, enter the modem
password in the Sign In field.
See the modem label for the default password.
4. Click the Sign In button.
The full Dashboard page displays.
5. Select Settings > Advanced > LAN.
The LAN page displays.
The diagnostics feature on the LAN page is intended for NETGEAR technical support
only. By default, the Enable Diagnostics Off radio button is selected.
Note
6. Do one of the following:
To enable Bridge mode, select the Bridge radio button. As an option, enter a different IP address
in the IP Address field and an LTE network mask in the Netmask (LTE) field.
When the modem functions in Bridge mode, the default LTE network mask setting (255.255.255.0)
works with most routers. If the modem and router do not operate together, adjust LTE network mask.
To enable Router mode, select the Router radio button.
Manage the Modem LAN Settings
26
LTE Modem Model LB2120
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear LB2120 4G LTE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear LB2120 4G LTE in the language / languages: English as an attachment in your email.

The manual is 3,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info