479754
4
Zoom out
Zoom in
Previous page
1/10
Next page
KWGR Open Source Guide (Rev 2.0)
Source Code and Executable
The following section of the document highlights the steps and procedures that are required to download the source code,
install the toolchain, compile and link the existing source code and develop the user applications for the KWGR614 Router.
Suse Linux 10.1 was used for development throughout this guide.
Note: The KWGR614 firmware had been built successfully on the following Linux OS platforms
- Redhat 9.0/8.x
- Fedora 5
- SuSE Linux 10.1
1. Download the complete archive from Netgear OSC web site
(http://kbserver.netgear.com/kb_web_files/open_src.asp
) and unpack
KWGR614_V1.0.1_10.17WW_gpl_package.zip
Note: V1.0.1_10.17 is the firmware version number. WW denotes Worldwide version. Other versions are available
e.g NA for North America. Apply the correct file name where appropriate, if you download a different version.
2. unzip KWGR614_V1.0.1_10.17WW_gpl_package.zip
Unzip will result in three files:
KWGR614_README.txt (The Opensource User Guide)
KWGR614_V1.0.1_10.17WW_src.tar.bz2
toolchain_mips_20050831.tar.bz2
3. Unpack the Source code.
tar –xvf KWGR614_V1.0.1_10.17WW_src.tar.bz2
This will create a sub directory KWGR614_xxx/.
xxx -> V1.0.1_10.17WW (xxx denotes the version number)
The Directory has a number of useful documents that we recommend to read before proceeding.
Useful Documents
- /vendors/Documentation/KWGR614_README.txt
- /SOURCE
- /README
- /Documentation/Adding-User-Apps-HOWTO
- /Documentation/Addid-Platforms-HOWTO
4. Install the Tool chain in the root Directory
# cd /
# mkdir uclibc
# cd uclibc
# tar jxvf toolchain_mips_20050831.tar.bz2
# mv toolchain_mips.pv.0831 toolchain_mips
Note: Root user permissions may be required to create the uclibc directory and install the toolchain into the root directory of
the filesystem.
5. Compile
Change working directory to KWGR614_xxx/
a. Type "make menuconfig", and customize your kernel config options.
- Target Platform Selection --->
[ * ] Customize Kernel Settings (NEW)
- Exit
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear KWGR614 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear KWGR614 in the language / languages: English as an attachment in your email.

The manual is 0,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear KWGR614

Netgear KWGR614 User Manual - English - 94 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info