670474
11
Zoom out
Zoom in
Previous page
1/159
Next page
Table 1. Front panel LED descriptions
LED Description
Power/Check
Solid green. The startup is completed, and the router is ready.
Blinking green. The
firmware is corrupted (visit http://www.netgear.com/support).
Blinking amber. The
firmware is upgrading, or the Restore Factory Settings button was
pressed.
Off.
Power is not supplied to the router.
Internet
Solid green. An IP address was received; the router is ready to transmit data.
Solid amber. The
router detected the Ethernet cable connection.
Off. No Ethernet cable is connected to the router.
2.4 GHz
Wireless
Solid green. The wireless interface is enabled.
Blinking green. The
wireless network is communicating data.
Off. The wireless interface is turned off.
5 GHz Wireless
Solid blue. The wireless interface is enabled.
Blinking green. The
wireless network is communicating data.
Off. The wireless interface is turned off.
LAN ports 1–4
Solid green. The local port is connected to a 1000 Mbps device.
Blinking green. Data
is being transmitted at 1000 Mbps.
Solid amber. The
local port is connected to a 10/100 Mbps device.
Blinking amber. Data
is being transmitted at 10/100 Mbps.
Off. No link is detected on this port.
USB
Solid green. The USB device is accepted by the router and is ready to be used.
Blinking green. A
USB device is in use.
Off. No USB device is connected, or the Safely Remove
Hardware button was clicked
and it is now safe to remove the attached USB device.
WPS/FastLane
Solid green. A WPS-capable or FastLane-capable device is accepted by the router and
is ready to be used.
Blinking
green. The
WPS-capable or FastLane-capable device can be associated with
the router within two minutes.
Off.
No WPS or FastLane connection exists.
Hardware Setup
11
A750 Wireless Dual Band Gigabit Router JR6150
The WLAN and WPS buttons toggle the WLAN and WPS functions on and off, as follows:
Wireless On/Off button. Pressing and holding the wireless LAN button for two
seconds turns the 2.4 GHz and 5 GHz wireless radios on and off. If the Wireless LEDs
are lit, the wireless radios are on. If the LEDs are off, the wireless radios are turned of
f
and you cannot connect wirelessly to the router.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear JR6150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear JR6150 in the language / languages: English as an attachment in your email.

The manual is 6,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear JR6150

Netgear JR6150 Installation Guide - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info