710873
66
Zoom out
Zoom in
Previous page
1/74
Next page
Manage Power over Ethernet
66
8-Port and 16-Port Gigabit Ethernet Smart Managed Plus Click Switch
Reset One or More PoE+ Ports
You can forcibly reset one or more PoE+ ports on the GSS108EPP switch. If a PoE device is
attached to the port, the device restarts. Resetting a PoE+ port does not affect its data link, so if a
non-PoE device is attached to the port, the device is not affected and does not restart.
To configure PoE+ port settings:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is
off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Access the Switch Using a Web
Browser on page 6.
The login window opens.
4. Enter the switch’s password in the password field.
The switch’s default password is password.
The Switch Information page displays.
5. Select System > PoE.
The PoE Port Configuration page displays.
6. Select the check boxes for the PoE+ ports that you want to reset or select the check box in
the heading to reset all four PoE+ ports.
7. Click the Power Cycle Port(s) button.
The ports are reset.
Fault Status The error description when the PoE port is in a fault state. The possible values are
as follows:
No Error. The port is not in any error state and can provide power.
MPS Absent. The port detected the absence of the main power supply,
preventing the port from providing power.
Short. The port detected a short circuit condition, preventing the port from
providing power.
Overload. The PD that is connected to the port attempts to draw more power
than allowed by the port’s settings, preventing the port from providing power
at all.
Power Denied. The port was denied power because of a shortage of power
or because of an administrative condition. In this condition, the port cannot
provide power.
Field Description
66


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear GSS116E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear GSS116E in the language / languages: English as an attachment in your email.

The manual is 0,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info