710873
51
Zoom out
Zoom in
Previous page
1/74
Next page
Manage and Monitor the Switch
51
8-Port and 16-Port Gigabit Ethernet Smart Managed Plus Click Switch
5. Select System > Management > Switch Management Mode.
6. Select one of the following radio buttons:
W
eb browser Only. You can configure the switch through a web browser by
accessing the local browser interface. You cannot configure the switch through the
ProSAFE Plus Utility.
W
eb browser GUI and ProSAFE Utility. You can configure the switch through a web
browser by accessing the local browser interface or through the ProSAFE Plus Utility.
This is the default setting.
7. Click the Apply button.
Your settings are saved.
Manage Access Control
Access control allows you to control which devices can access the switch over a web
browser for management purposes. By default, access control is disabled. By adding one or
more devices to the Access Control table, access control is enabled and only devices in the
table are allowed to access the local browser interface of the switch.
Add Devices to the Access Control Table
Be sure that you use a valid subnet mask when you add a device or a range of devices to the
Access Control table.
CAUTION:
Add the IP address and subnet mask for the device from which you are
accessing the switch to the Access Control table before you add any other
devices to the table. Otherwise, you are locked out from the local browser
interface of the switch.
To add devices to the Access Control table:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is
of
f-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser
, enter the IP address of the switch.
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear GSS116E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear GSS116E in the language / languages: English as an attachment in your email.

The manual is 0,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info