710872
683
Zoom out
Zoom in
Previous page
1/700
Next page
Configuration Examples
683
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
Destination MAC Mask: 00:00:00:00:FF:FF
EtherType User Value:
Source MAC: 02:02:1A:BC:DE:EF
Source MAC Mask: 00:00:00:00:FF:FF
VLAN ID: 2
For more information about MAC ACL rules, see Configure MAC ACL Rules on
page 589.
3. From the MAC Binding Configuration page, assign the Sales_ACL to the interface gigabit
ports 6, 7, and 8, and then click the Apply button. (See Configure MAC Binding on
page 591.)
You can assign an optional sequence number to indicate the order of this access list
relative to other access lists if any are already assigned to this interface and direction.
4. The MAC Binding Table displays the interface and MAC ACL binding information (See View
and Delete MAC ACL Bindings in the MAC Binding Table on page 593).
The ACL named Sales_ACL looks for Ethernet frames with destination and source MAC
addresses and MAC masks defined in the rule. Also, the frame must be tagged with VLAN ID
2, which is the Sales department VLAN. The CoS value of the frame must be 0, which is the
default value for Ethernet frames. Frames that match this criteria are permitted on interfaces
6, 7, and 8 and are assigned to the hardware egress queue 0, which is the default queue. All
other traffic is explicitly denied on these interfaces. To allow additional traffic to enter these
ports, you must add a new permit rule with the desired match criteria and bind the rule to
interfaces 6, 7, and 8.
Standard IP ACL Sample Configuration
The following example shows how to create an IP-based ACL that prevents any IP traffic
from the Finance department from being allowed on the ports that are associated with other
departments. Traffic from the Finance department is identified by each packet’s network IP
address.
1. From the IP ACL page, create a new IP ACL with an IP ACL ID of 1 (See Configure an
IP ACL on page 594).
2. From the IP Rules page, create a rule for IP ACL 1 with the following settings:
Rule ID: 1
Action: Deny
Assign Queue ID: 0 (optional: 0 is the default value)
Match Every: False
Source IP Address: 192.168.187.0
Source IP Mask: 255.255.255.0
For additional information about IP ACL rules, see Configure Rules for an IP ACL on
page 595.
3. Click the Add button.
683


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear GSM4210P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear GSM4210P in the language / languages: English as an attachment in your email.

The manual is 14,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear GSM4210P

Netgear GSM4210P Installation Guide - English - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info