710872
667
Zoom out
Zoom in
Previous page
1/700
Next page
Maintenance and Troubleshooting
667
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
5. Select Maintenance > Troubleshooting > Ping IPv4.
6. Use IP Address/Host Name to enter the IP address or host name of the station for the
switch to ping.
The initial value is blank.
7. In the Count field, enter the number of echo requests to send.
The default value is 3. The range is 1 to 15.
8. Enter the Interval between ping packets in seconds.
The default value is 3 seconds. The range is 1 to 60.
9. Enter the Datagram Size of ping packet.
The default value is 0 bytes. The range is 0 to 65507.
10. Enter the Source IP address or interface to use when sending the echo request packets.
If source is not required, select None as the source option. Possible values are as
follows:
None. The source address of the ping packet would be the address of the default
outgoing interface.
IP Address. The source IP address to use when sending the echo request packets.
This field is shown when IP Address is selected as the source option.
Interface. The interface to use when sending the echo request packets. This field is
shown when Interface is selected as the source option.
Note: Values configured in the fields on this page are not saved to the switch.
As a result, refreshing the page sets these fields to the default values.
11. Click the Apply button.
The pings are sent to the specified address. The switch sends the number of pings
specified in the Count field, and the results are displayed below the configurable data in
the Results area.
667


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear GSM4210P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear GSM4210P in the language / languages: English as an attachment in your email.

The manual is 14,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear GSM4210P

Netgear GSM4210P Installation Guide - English - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info