710872
644
Zoom out
Zoom in
Previous page
1/700
Next page
Monitor the System
644
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
6. From the Session ID list, select the session ID.
7. Select the Admin Mode True (enabled) or False (disabled) radio button for the selected
session.
When a particular session is enabled, any traffic entering or leaving the source ports of
the session is copied (mirrored) onto the corresponding destination port or a remote
switched port analyzer (RSPAN) VLAN. By default, the Admin mode is disabled.
8. Select the RSPAN Source VLAN from the list of available VLAN IDs.
9. Select the RSPAN Destination VLAN from the list of destination interfaces.
10. Configure the Filter Type.
IP or MAC ACLscan mirror traffic that matches a permit rule. Possible values are as
follows:
None. No filter is configured for the session.
IP ACL. Configure IP ACL.
MAC ACL. Configure MAC ACL.
11. Enter the Filter Name, if it is configured for the session.
12. Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
Configure sFlow
sFlow is the standard for monitoring high-speed switched and routed networks. sFlow
technology is built into network equipment and gives complete visibility into network activity,
enabling effective management and control of network resources.
The sFlow monitoring system consists of an sFlow Agent (embedded in a switch or router or
in a standalone probe) and a central sFlow Collector. The sFlow Agent uses sampling
technology to capture traffic statistics from the device it is monitoring. sFlow datagrams are
used to immediately forward the sampled traffic statistics to an sFlow Collector for analysis.
644


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear GSM4210P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear GSM4210P in the language / languages: English as an attachment in your email.

The manual is 14,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear GSM4210P

Netgear GSM4210P Installation Guide - English - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info