710872
639
Zoom out
Zoom in
Previous page
1/700
Next page
Monitor the System
639
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
6. In the Source Interface Configuration section, select which interfaces are displayed on the
page:
Select Unit ID to display the physical ports of the selected unit.
Select LAG to display a list of LAGs only.
Select CPU to display a list of CPUs only.
Select VLANs to display a list of available VLANs.
Select All to display a list of all physical ports, LAG, CPU, and VLANs.
7. Use one of the following methods to select an interface:
In the Go To Interface field, enter the interface in the unit/slot/port format and click on
the Go button.
Next to the Interface column, select the check box for the interface or interfaces that
you want to include.
8. In the Direction field, specify the direction of the traffic to be mirrored from the configured
mirrored ports.
If the value is not configured, it is shown as None. The default value is None. Direction
options are as follows:
None. The value is not configured.
Tx and Rx. Monitors transmitted and received packets.
Rx. Monitors received (ingress) packets only.
Tx. Monitors transmitted (egress) packets only.
Note: For VLANs only, the Tx and Rx and None options are applicable.
Tx and Rx. Specify VLAN as the source VLAN.
None. Remove the specified source VLAN.
If the VLAN is configured as the source VLAN, its direction is displayed as a blank
field.
9. Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
The settings are applied to the system. If the port is configured as a source port, the
Mirroring Port field value is Mirrored.
The Status field indicates the interface status.
Note: If an error dialog includes multiple error messages, resolve the first
error messages to be able to view the remaining errors messages.
639


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear GSM4210P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear GSM4210P in the language / languages: English as an attachment in your email.

The manual is 14,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear GSM4210P

Netgear GSM4210P Installation Guide - English - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info