710872
632
Zoom out
Zoom in
Previous page
1/700
Next page
Monitor the System
632
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
This enables or disables logging to configured syslog hosts. When the Admin Status is
disabled, the device does not relay logs to syslog hosts, and no messages are sent to any
collectors or relays. When the syslog Admin Status is enabled, messages are sent to
configured collectors or relays using the values configured for each collector or relay.
7. Use Local UDP Port to specify the port on the local host from which syslog messages are
sent. The range is 1 to 65535. The default port is 514.
8. Specify the Source Interface to use for syslog.
Possible values are as follows:
None. When the None value is displayed, it means that the configured routing
interface has become nonrouting.
Routing interface
Routing VLAN
Routing loopback interface
Tunnel interface
Service port
By default, VLAN 1 is used as source interface.
9. Use the USB Filename field to specify the name of the USB file. The filename cannot
include the following symbols: V:*?”<>!. Up to 64 characters can be entered. The 64
characters are only the filename length, the extension is automatically added. The default
value is blank.
10. Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
Note: Syslog can write the log messages simultaneously to a remote server
and the USB storage device.
Configure the Syslog Host Settings
To configure the syslog host settings:
1. Launch a web browser.
2. Enter http://<ipaddress> in the web browser address field.
The login window opens.
3. Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
632


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear GSM4210P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear GSM4210P in the language / languages: English as an attachment in your email.

The manual is 14,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear GSM4210P

Netgear GSM4210P Installation Guide - English - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info