710872
16
Zoom out
Zoom in
Previous page
1/700
Next page
Getting Started
16
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
Release Overview
The NETGEAR Prosafe Managed software version 12.0.2 is for the M4200 and M4300
Series ProSAFE Managed Switches with 10G uplinks.
These switches introduce the following new features:
Support for link dependency
The link dependency feature lets you enable or disable one or more ports based on the
link state of one or more different ports. With link dependency enabled on a port, the link
state of that port depends on the link state of another port. For example, if port A depends
on port B and the switch detects a link loss on port B, the switch automatically brings
down the link on port A. When the link is restored to port B, the switch automatically
restores the link to port A. For more information, see Configure Link Dependency on
page 139.
Capability to send syslog messages can be sent to a to a USB flash storage drive. For
more information, see Configure the Syslog Settings on page 631.
Capability to send packets that are mirrored from the CPU to a USB flash storage drive.
For more information, see Packet Capturing on page 673.
Support for an out-of-band (OOB) port.
Available Publications and Online Help
A number of publications are available at downloadcenter.netgear.com, including the
following publication:
The installation guide for your switch:
- Installation NETGEAR ProSAFE Managed Switches, M4200 Series
- Installation NETGEAR ProSAFE Managed Switches, M4300 Series
The hardware installation guide for your switch:
- ProSAFE Managed Switch Series M4200 Hardware Installation Guide
- ProSAFE Managed Switch Series M4200 Hardware Installation Guide
M4200 and M4300 Series ProSAFE Managed Switches Software Setup Manual
M4200 and M4300 Series ProSAFE Managed Switches CLI Command Reference
Manual
M4200 and M4300 Series ProSAFE Managed Switches Software Administration Manual
M4200 and M4300 Series ProSAFE Managed Switches User Manual (this document).
You can also access this document online when you are logged in to the switch. Select
Help > Online Help > User Guide.
When you log into the web management interface, online help is available. See Online Help
on page 20.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear GSM4210P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear GSM4210P in the language / languages: English as an attachment in your email.

The manual is 14,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear GSM4210P

Netgear GSM4210P Installation Guide - English - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info