710796
87
Zoom out
Zoom in
Previous page
1/93
Next page
The CABLE TEST page displays.
5. Select one or more ports to test by clicking the port icons.
The icons for selected ports display blue.
6.
Click the NEXT button.
The switch sends a signal to the cables for the selected ports, causing the ports to
be temporarily out of service and traffic on the ports to be temporarily affected.
When the test is complete, the results are displayed. If a fault was detected, the
distance (from the switch port) to that fault is displayed in feet.
7.
Click the DONE button.
The section with the test results closes.
Reboot the Switch From the Local Browser
Interface
You can reboot the switch remotely from the local browser interface.
To reboot the switch from the local browser interface:
1.
Open a web browser from a computer that is connected to the same network as the
switch or to the switch directly through an Ethernet cable.
2. Enter the IP address that is assigned to the switch.
The login page displays.
3. Enter the switch password.
The default password is password. The password is case-sensitive.
The HOME page displays.
4.
From the menu at the top of the page, to the right of NETGEAR, click the three-dot
icon and select Reboot Switch.
A pop-up window opens.
5.
Click the CONTINUE button.
The switch reboots. Your switch web session is disconnected and you must log back
in to the local browser interface.
User Manual87Diagnostics and
Troubleshooting
8-Port Gigabit Ethernet Smart Managed Plus Switch Model GS908E
87


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear GS908E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear GS908E in the language / languages: English as an attachment in your email.

The manual is 1,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear GS908E

Netgear GS908E Installation Guide - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info