710795
107
Zoom out
Zoom in
Previous page
1/113
Next page
Resolve a Subnet Conflict to Access the
Switch
If you power on the switch before you connect it to a network that includes a DHCP
server (or a router that functions as a DHCP server), the switch uses its own default IP
address of 192.168.0.239. This subnet might be different from the subnet used in your
network.
To resolve this subnet conflict:
1. Disconnect the Ethernet cable between the switch and your network.
2.
Unplug the power adapter of the switch.
3. Reconnect the Ethernet cable between the switch and your network.
4.
Plug the power adapter of the switch into an electrical outlet.
The switch powers on. The DHCP server in the network discovers the switch and
assigns it an IP address that is in the correct subnet for the network.
Hardware Troubleshooting Chart
The following table lists symptoms, possible causes, and possible solutions for hardware
problems that might occur.
Table 4. Troubleshooting chart
Possible SolutionPossible CauseSymptom
Check the power cable connections at the
switch and the power source.
Make sure that all cables are used correctly
and comply with the Ethernet specifications.
Make sure that the Power LED is enabled.
Power is not supplied to the switch
or the Power LED is disabled.
The Power LED is off.
Check the crimp on the connectors and make
sure that the plug is properly inserted and
locked into the port at both the switch and
the connecting device.
Make sure that all cables are used correctly
and comply with the Ethernet specifications.
Check for a defective port, cable, or module
by testing them in an alternate environment
where all products are functioning.
Make sure that the port LED is enabled and
sufficiently bright.
The port connection is not working
or the port LED is disabled or
dimmed.
A port LED is off when the
port is connected to a
powered-on device.
User Manual107Diagnostics and
Troubleshooting
Nighthawk SX10 Pro Gaming Advanced 8-Port Gigabit Ethernet Switch Model GS810EMX
107


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear GS810EMX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear GS810EMX in the language / languages: English as an attachment in your email.

The manual is 1,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear GS810EMX

Netgear GS810EMX Installation Guide - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info