710798
268
Zoom out
Zoom in
Previous page
1/275
Next page
Ports g1-g5
Switch 1
connected to hosts
root bridge
Switch 2
Switch 3
Ports g1-g5
connected to hosts
Ports g1-g5
connected to hosts
Ports g6-g8
connected to Switch 2 and 3
Ports g6-g8
connected to Switch 1 and 2
Configuration Examples
268
GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches
Perform the following procedures on each switch to configure MSTP:
1. Use the VLAN Configuration screen to create VLANs 300 and 500.
For more information, see VLAN Configuration on page 82.
2. Use the VLAN Membership screen to include ports g1–g8 as tagged (T) or untagged (U)
members of VLAN 300 and VLAN 500.
For more information, see VLAN Membership Configuration on page 84.
3. In the STP Configuration screen, enable the Spanning
Tree State option.
For more information, see STP Configuration on page 93.
Use the default values for the rest of the STP configuration settings. By default, the STP
operation mode is MSTP
, and the configuration name is the switch MAC address.
4. In the CST Configuration screen, set the Bridge Priority value for each of the three switches
to force Switch 1 to be the root bridge:
Switch 1. 4096
Switch 2. 12288
Switch 3. 20480
Note: Bridge priority values are multiples of 4096.
If you do not specify a root bridge and all switches have the same Bridge Priority value,
the switch with the lowest MAC address is elected as the root bridge.
For more information, see CST Configuration on page 94.
268


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear GS752TP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear GS752TP in the language / languages: English as an attachment in your email.

The manual is 14,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear GS752TP

Netgear GS752TP Installation Guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info