710798
46
Zoom out
Zoom in
Previous page
1/275
Next page
Configuring System Information
46
GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches
PoE Port Configuration
Use the PoE Port Configuration screen to configure PoE settings on the ports. The following
information is displayed for each port:
Table 9. PSE Port Information
Field Description
Admin Mode Indicates whether the port can deliver power (Enable) or cannot deliver
power (Disable).
Priority Level The switch might not be able to supply power to all connected devices.
Priority is used to determine which ports can supply power if power is
limited. When ports have the same priority
, the lower numbered port is given
a higher priority.
High Power Mode 802.3at.
Class Class of the powered device (PD) connected to the port. The classes define
the range of maximum power output that the switch generates.
The power
level that the PD can actually use is slightly lower. The classes are defined
as follows:
0. 0–15.4W
1. 0–4W
2. 0–7W
3. 0–15.4W
4. 0–30W.
Timer Schedule Indicates the timer schedule to use for the port. By default, no timer
schedules are configured.
Output Voltage (Volt) Displays the current voltage being delivered to device.
Output Current (mA) Displays the current being delivered to device.
Output Power (Watt) Displays the current power being delivered to the device.
Power Limit Displays the maximum amount of power limit that the port can generate. The
maximum amount is 15400 mW
.
Status Status of power being delivered by the port:
Disabled. No power is being delivered.
DeliveringPower. Power is being drawn by a connected device.
Fault.
There is a problem with the port.
T
est. The port is in test mode.
OtherFault.
The port is idle due to an error condition.
Searching. Port default state when PD not connected.
To configure PoE on ports:
1. Select System
PoE Advanced PoE Port Configuration.
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear GS752TP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear GS752TP in the language / languages: English as an attachment in your email.

The manual is 14,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear GS752TP

Netgear GS752TP Installation Guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info