710798
20
Zoom out
Zoom in
Previous page
1/275
Next page
Getting Started
20
GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches
Depending upon the status of the port, the LED of the port status lights. Green indicates that
the port is enabled. Red indicates that an error occurred on the port and the link is disabled.
The LED of the port speed light in either green or yellow.
A green LED indicates operational ports at the link speed of 1000 Mbps.
A yellow LED indicates operational ports at the link speed of 10/100 Mbps.
The system LEDs are on the left side of the front panel.
Power/Status LED
The Power LED is a bicolor LED that serves as an indicator of power and diagnostic status.
The following indications are given by the following LED states:
A solid green LED indicates that the power is supplied to the switch from the internal
power supply and is operating normally.
A blinking green LED indicates that the internal power supply has failed, and that the
system is drawing power from a remote power supply or PoE power from an external
power supply.
A solid yellow LED indicates that system is in the boot-up stage.
No lit LED indicates that power is disconnected.
FAN Status LED
FAN status is indicated as follows:
A solid yellow LED indicates that the fan is faulty.
No lit LED indicates that the fan is operating normally.
Max PoE LED
The Max PoE LED indicates the following:
A solid yellow LED indicates that less than seven watts of PoE power are available.
A blinking yellow LED indicates that the PoE Max LED was lit within the previous 2
minutes.
No lit LED indicates that at least seven watts of PoE power are available.
LED Status LED
The LED Status LED indicates the following:
A solid green LED indicates that the Port LED is in Ethernet Mode.
A solid yellow LED indicates that the Port LED is in PoE Mode.
The following image shows the device view of the NETGEAR switch.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear GS752TP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear GS752TP in the language / languages: English as an attachment in your email.

The manual is 14,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear GS752TP

Netgear GS752TP Installation Guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info