710798
2
Zoom out
Zoom in
Previous page
1/2
Next page
December 2012
NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of
NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. Information is subject to
change without notice. Other brand and product names are registered trademarks or trademarks of their
respective holders. © NETGEAR, Inc. All rights reserved.
For the complete EU Declaration of Conformity, visit
http://support.netgear.com/app/answers/detail/a_id/11621/.
Intended for indoor use only in all EU member states, EFTA states, and Switzerland.
The Smart Control Center Utility finds the switch and displays its MAC address,
IP address, and model number. If you cannot configure your switch, verify that
the cable connections are secure and that the IP address configuration of the
computer is in the same subnet as the switch, and click the Discover button.
3. Click to select the line displaying the details of your switch. If there are multiple
switches in your network, be sure to select the one you want to configure.
4. Click Web Browser Access to view the switch Login screen.
5. Enter the default password of password in lower case letters and click Login.
The switch displays the switch main settings page. Configure the switch for
your network. Consult the reference manual on the resource CD or the online
help in the switch for assistance with configuration procedures.
After you log in to the switch, the main System Information screen displays.
Use the configuration menu options to configure your switch.
Troubleshooting Tips
Here are some tips for correcting simple problems you might have.
Be sure to power on your computer and switch in the correct sequence:
First, turn off the switch and computer. Next, turn on the switch and wait 2
minutes. Last, turn on the computer.
Make sure the Ethernet cables are plugged in.
For each powered-on computer connected to the switch, the corresponding
switch LAN port status LED is lit.
Make sure the network settings of the computer are correct.
In most cases, computers should be configured to obtain an IP address through
DHCP.
If your network uses static IP addresses, be sure that the switch and computer
are configured with valid IP addresses. For help with this, see the software
administration manual.
Technical Support
After installing your device, locate the serial number on the label of your product and
use it to register your product at https://my.netgear.com.
You must register your product before you can use NETGEAR telephone support.
NETGEAR recommends registering your product through the NETGEAR website.
For product updates and web support, visit http://support.netgear.com.
For additional information about setting up, configuring, and using your smart
switch, see the software administration manual. You can get the manual online at
http://downloadcenter.netgear.com.
NETGEAR recommends that you use only the official NETGEAR support
resources.
WARNING!!
Do not stack equipment, or place equipment in tight spaces, in drawers, or on
carpets. Make sure that your equipment has at least 2 inches (5 cm) of air
space on all sides.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear GS752TP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear GS752TP in the language / languages: English as an attachment in your email.

The manual is 0,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear GS752TP

Netgear GS752TP User Manual - English - 275 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info