710895

Netgear GS748TP Manual

118
Zoom out
Zoom in
Previous page
1/216
Next page
GS700TP Smart Switch Software Administration Manual
Configuring Switching Settings 4-31
v1.0, April 2008
• BPDU Handling – Select the method of handling STP BPDUs (Bridge Protocol Data
Units) when STP is disabled on the device or interface. The possible field values are:
– Filtering – BPDUs are filtered. This the default.
– Flooding – BPDUs are flooded to all ports in the system.
– Bridging – BPDUs are bridged to all ports in the VLAN.
Status
• Bridge Identifier – Displays the Bridge priority and MAC address.
• Time Since Topology Change – Displays the amount of time that has elapsed since the
bridge was initialized or reset or the last topology change that occurred. The time is
displayed in a day-hour-minute-second format, such as 2 days 5 hours 10 minutes and 4
seconds.
• Designated Root – Displays the Root Bridge priority and MAC address.
• Root Port – Displays the port number that offers the lowest cost path from this bridge to
the Root Bridge. This field is significant when the bridge is not the Root Bridge.
• Max Age (Sec) – Displays the device Maximum Age Time. The Maximum Age Time is
the amount of time in seconds a bridge waits before sending configuration messages. The
default Maximum Age Time is 20 seconds.
• Forward Delay (Sec) – Displays the device Forward Delay Time. The Forward Delay
Time is the amount of time in seconds a bridge remains in a listening and learning state
before forwarding packets. The default is 15 seconds.
• Hello Time (Sec) – Displays the device Hello Time. The Hello Time indicates the amount
of time in seconds a Root Bridge waits between configuration messages. The default is 2
seconds.
2. Select Enable or Disable in the Spanning Tree State provided field.
3. Select the STP Operation Mode in the provided field.
4. If you selected Disable in the Spanning Tree State field, select the BPDU Handling mode
from the list in the provided field.
5. Click APPLY to update the device.
Advanced
The STP Advanced menu contains the following options:
• “STP Configuration”
… 118 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear GS748TP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear GS748TP in the language / languages: English as an attachment in your email.

The manual is 3,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info