710895
47
Zoom out
Zoom in
Previous page
1/216
Next page
GS700TP Smart Switch Software Administration Manual
3-12 Managing System Settings
v1.0, April 2008
Disable – Disable the Device Discovery protocol and stops the power supply to the
device using the PoE module.
Priority Level – Select the port priority if the power supply is low. The field default is
low. For example, if the power supply is running at 99% usage, and port 1 is prioritized as
high, but port 3 is prioritized as low, port 1 is prioritized to receive power and port 3 may
be denied power. The possible field values are:
Low – Set the PoE priority level as low. This is the default level.
Medium – Set the PoE priority level as medium.
High – Set the PoE priority level as high.
Class – Displays the classification of the powered device. The class defines the maximum
power that can be provided to the powered device. The possible field values are:
Class 0 – The maximum power level at the Power Sourcing Equipment is 15.4 Watts.
Class 1 – The maximum power level at the Power Sourcing Equipment is 4.0 Watts.
Class 2 – The maximum power level at the Power Sourcing Equipment is 7.0 Watts.
Class 3 – The maximum power level at the Power Sourcing Equipment is 15.4 Watts.
Class 4 – Treated as Class 0.
Output VoltageDisplays the Output Voltage in Volts.
Output Current – Displays the Output current in milliamps.
Output Power – Displays the Output power in Watts.
Power Limit – Displays the power limit in Watts.
Status – Displays the port’s PoE status. The possible field values are:
Delivering Power – The device is enabled to deliver power via the interface.
Disabled – The device is disabled for delivering power via the interface.
Test Fail – The powered device test has failed. For example, a port could not be
enabled and cannot be used to deliver power to the powered device.
Testing – The powered device is being tested. For example, a powered device is tested
to confirm it is receiving power from the power supply.
Searching – The device is currently searching for a powered device. Searching is the
default PoE operational status.
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear GS748TP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear GS748TP in the language / languages: English as an attachment in your email.

The manual is 3,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info