710799

Netgear GS728TPP Manual

258
Zoom out
Zoom in
Previous page
1/275
Next page
Configuration Examples
258
GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches
1. In the IP ACL screen, create an IP ACL with an IP ACL ID of 1.
For more information, see IP ACL on page 196.
2. In the IP Rules screen, create a rule for IP ACL 1 with the following settings:
• Rule ID. 1
• Action. Deny
• Match Every. False
• Source IP Address. 192.168.187.0
• Source IP Mask. 255.255.255.0
For more information about IP ACL rules, see IP Rules on page 198.
3. Click Add.
4. In the IP Rules screen, create a second rule for IP ACL 1 with the following settings:
• Rule ID. 2
• Action. Permit
• Match Every. True
5. Click Add.
6. In the IP Binding Configuration screen, assign ACL ID 1 to the Ethernet ports 2, 3, and 4,
and assign a sequence number of 1.
For more information, see IP Binding Configuration on page 205.
By default, this IP ACL is bound on the inbound direction, so it examines traffic as it
enters the switch.
7. Click APPLY.
8. Use the IP Binding Table screen to view the interfaces and IP ACL binding information.
For more information, see IP Binding Table on page 206.
The IP ACL in this example matches all packets with the source IP address and subnet mask
of the Finance department network and denies it on the Ethernet interfaces 2, 3, and 4 of the
switch. The second rule permits all non-Finance traffic on the ports. The second rule is
required because there is an explicit deny all rule as the lowest priority rule.
… 258 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear GS728TPP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear GS728TPP in the language / languages: English as an attachment in your email.

The manual is 14,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear GS728TPP

Netgear GS728TPP Installation Guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info