710799
155
Zoom out
Zoom in
Previous page
1/275
Next page
Configure Quality of Service
155
GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches
Committed Rate. The committed rate is the average bandwidth in bits per seconds
specified in kilobits-per-second (Kbps) and is an integer from 100 to 1000000.
Committed Burst Size. The committed burst size is the maximum amount of traffic
allowed in one burst (in bytes) and is an integer from 3000 to 19173960.
Note: The Token Bucket algorithm is used, in which the committed rate is
the rate at which the bucket is filled, and the committed burst size is
the size of the bucket. This means that the committed burst size is the
maximum size of a burst that can be sent.
Conform Action. Determines what happens to packets that are considered
conforming (below the police rate). Select one of the following actions:
Send. (Default) These packets are presented unmodified by DiffServ to the
system forwarding element.
Drop. These packets are immediately dropped.
Mark CoS. These packets are marked by DiffServ with the specified CoS value
before being presented to the system forwarding element. This selection requires
that the Mark CoS value field be set.
Mark IP DSCP. These packets are marked by DiffServ with the specified DSCP
value before being presented to the system forwarding element. This selection
requires that the DSCP value field be set. If you select Other, enter a custom
value in the DSCP Value field that appears.
Violate Action. Determines what happens to packets that are considered
non-conforming (above the police rate). Select one of the following actions:
Send. These packets are presented unmodified by DiffServ to the system
forwarding element.
Drop. These packets are immediately dropped.
4. Click APPLY to send the updated configuration to the switch.
Configuration changes take effect immediately.
Service Configuration
Use the Service Configuration screen to activate a policy on an interface.
To configure DiffServ policy settings on an interface:
1. Select QoS DiffServ Advanced Service Configuration.
155


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear GS728TPP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear GS728TPP in the language / languages: English as an attachment in your email.

The manual is 14,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear GS728TPP

Netgear GS728TPP Installation Guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info