710889
17
Zoom out
Zoom in
Previous page
1/50
Next page
Smart Switch Series Software Manual
Web-Based Management Interface 4-3
July 2005
Flow Control: Indicates whether Flow Control support is set for on (Enabled) or off
(Disabled). The default setting for all ports is enabled.
Link Status: Indicates the current speed and duplex for the port. DOWN means no link.
The next part of the Switch Status page shows the Virtual Local Area Network (VLAN) status. A
VLAN is a way to electronically separate specified ports on the same switch into separate
broadcast domains. By using VLAN, users can group by logical function instead of physical
location.
This page displays the port-based IEEE 802.1Q VLAN settings. The default VLAN setting is all
ports belong to port-based VLAN 1. To configure user-defined VLAN groups, go to the Switch>
VLAN page.
Port Trunking is a feature that allows multiple links between switches to work as one virtual link
(aggregate link). Trunks can be defined for similar port types only. For example, a 10/100 port
cannot form a Port Trunk with a gigabit port. For 10/100 ports, trunks can only be formed within
the same bank.
This page displays the Trunk status. The default Trunk setting is all groups disabled. To configure
user-defined TURNK groups, go to the Switch> Trunking page.
If the IEEE802.1Q VLAN is enabled, this page will display the Tagged VLAN status. To know
more about Tag VLAN, see Switch> VLAN for details.
System> IP Access List Page
This page displays an IP access list, which lists switches that are allowed to login this Switch. The
switch will only respond to requests from computers with the IP address in the list, so make sure
you include your IP address if you are using this feature. This is a powerful way to limit remote
access to your switch. The default setting is all host IP addresses allowed.
Note: Once this new IP access is enabled, you can only access the switch via this IP. Make sure
that your new IP is the same of current PC.
System> Set-up Page
This page will allow access to the system information parameters.
Enter Login Timeout. The default duration is 5 minutes.
Enter System Name and Location Name
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear GS716Tv1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear GS716Tv1 in the language / languages: English as an attachment in your email.

The manual is 0,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info