710811
115
Zoom out
Zoom in
Previous page
1/480
Next page
8-Port or 16-Port Gigabit Smart Managed Pro Switch Model GS418TPP, GS510TLP, and GS510TPP
Configure System Information User Manual115
The following table describes the DHCP snooping statistics.
Table 29. DHCP Snooping Statistics information
Field Description
Interface The interface associated with the rest of the data in the row.
MAC Verify Failures The number of DHCP messages that were dropped because the source MAC address
and client hardware address did not match. MAC address verification is performed only if
it is globally enabled.
Client Ifc Mismatch The number of packets that were dropped by DHCP snooping because the interface and
VLAN on which the packet was received do not match the client’
s interface and VLAN
information stored in the binding database.
DHCP Server Msgs
Received
The number of DHCP server messages ((DHCPOFFER, DHCPACK, DHCPNAK,
DHCPRELEASEQUER
Y) that were dropped on an untrusted port.
Manage dynamic ARP Inspection
Dynamic ARP Inspection (DAI) is a security feature that rejects invalid and malicious ARP
packets. DAI prevents a class of man-in-the-middle attacks where an unfriendly station
intercepts traffic for other stations by poisoning the ARP caches of its unsuspecting
neighbors. The malicious attacker sends ARP requests or responses mapping another
station’s IP address to its own MAC address.
When DAI is enabled, the switch drops ARP packets whose sender MAC address and
sender IP address do not match an entry in the DHCP snooping bindings database.
You can
optionally configure additional
ARP packet validation.
When DAI is enabled on a VLAN, DAI is enabled on the interfaces (physical ports or LAGs)
that are members of that VLAN. Individual interfaces are configured as trusted or untrusted.
The trust configuration for DAI is independent of the trust configuration for DHCP snooping.
Configure dynamic ARP inspection globally
If you configure the source MAC address validation option, DAI verifies that the sender MAC
address in an ARP packet equals the source MAC address in the Ethernet header.
The Ethernet header includes a configurable option to verify that the target MAC address in
the ARP packet equals the destination MAC address. This check applies only to
ARP
responses, since the target MAC address is unspecified in ARP requests. You can also
enable IP address checking. When this option is enabled, DAI drops ARP packets with an
invalid IP address. The following IP addresses are considered invalid:
0.0.0.0
255.255.255.255
All IP multicast addresses
All class E addresses (240.0.0.0/4)
Loopback addresses (in the range 127.0.0.0/8)
115


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear GS418TPP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear GS418TPP in the language / languages: English as an attachment in your email.

The manual is 7,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear GS418TPP

Netgear GS418TPP Installation Guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info