710811
13
Zoom out
Zoom in
Previous page
1/480
Next page
8-Port or 16-Port Gigabit Smart Managed Pro Switch Model GS418TPP, GS510TLP, and GS510TPP
Get Started User Manual13
Switch management and discovery
overview
The switch provides administrative management options that let you configure, monitor, and
control the network. Using the local browser interface, you can configure the switch and the
network, including the ports, the management VLAN, VLANs for traffic control, link
aggregation for increased bandwidth, quality of service (QoS) for prioritizing traffic, and
network security.
Initial discovery of the switch on the network requires one of the following tools:
NETGEAR Smart Control Center (SCC) program. The SCC runs on a Windows-based
computer
. You can download the SCC program from
netgear.com/support/download/.
For more information about the SCC program see
Discover a switch in a network with a
DHCP server on page 14 and Discover a switch in a network without a DHCP server on
page 15.
NETGEAR Switch Discovery Tool. If you use a Mac computer, you can use the
NETGEAR Switch Discovery
Tool to discover the switch in your network and access the
local browser interface of the switch. For more information about the Switch Discovery
Tool,
Use the NETGEAR Switch Discovery Tool to access the switch on page 17.
NETGEAR Insight app. Y
ou can also install the NETGEAR Insight app on an iOS or
Android mobile device and discover the IP address of the switch. For more information
about the Insight app, see
Use the NETGEAR Insight app to discover and register the
switch on page 18.
You can also get the IP address of the switch from the DHCP server in the network or use an
IP scanner utility.
After discovery
, you can configure the switch using the local browser interface for advanced
setup and configuration of features, or the SCC program for very basic setup. For more
information, see the SCC user manual, which you can download from
netgear.com/support/download/.
Change the default IP address of the switch
To enable remote management of the switch through a web browser or SNMP, connect the
switch to the network and specify an IP address, subnet mask, and default gateway. The
switch default IP address is 192.168.0.239 and the default subnet mask is 255.255.255.0.
To change the default IP address of the switch, use one of the following methods:
Dynamic assignment through DHCP. DHCP is enabled on the switch by default. If you
connect the switch to a network with a DHCP server, the switch obtains its network
information automatically. You can use the Smart Control Center to discover the
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear GS418TPP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear GS418TPP in the language / languages: English as an attachment in your email.

The manual is 7,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear GS418TPP

Netgear GS418TPP Installation Guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info