710763
342
Zoom out
Zoom in
Previous page
1/362
Next page
S350 Series 8-Port Gigabit Ethernet Smart Managed Pro Switch Models GS308T and GS310TP
Configuration Examples User Manual342
definition to convey some QoS characteristics to downstream switches that do not
routinely look at the DSCP value in the IP header.
Policing. A method of constraining incoming traf
fic associated with a particular class so
that it conforms to the terms of the TCS. Out-of-profile packets that are either in excess of
the conformance specification or are nonconformant are dropped.
Counting. Updating octet and packet statistics to keep track of data handling along traffic
paths within Dif
fServ. In this DiffServ feature, counters are not explicitly configured by the
user, but are designed into the system based on the DiffServ policy being created. For
more information, see
Monitor the Switch and the Ports on page 289.
Assigning QoS Queue. Directs a traffic stream to the specified QoS queue.
This allows a
traffic classifier to specify which one of the supported hardware queues are used for
handling packets belonging to the class.
Redirecting. Forces a classified traffic stream to a specified egress port (physical or
LAG).
This can occur in addition to any marking or policing action. It can also be specified
along with a QoS queue assignment.
DiffServ Example Configuration
To create a DiffServ class and policy and attach them to a switch interface, follow these
steps:
1. On the QoS Class Configuration page, create a new class with the following settings:
Class Name. Class1
Class Type. All
For more information, see
Configure a DiffServ Class on page 184.
2. Click the Class1 hyperlink to view the DiffServ Class Configuration page for this class.
3. Configure the following settings for Class1:
Protocol Type. UDP
Source IP Address. 192.12.1.0.
Source Mask. 255.255.255.0.
Source L4 Port. Other
, and enter 4567 as the source port value.
Destination IP Address. 192.12.2.0.
Destination Mask. 255.255.255.0.
Destination L4 Port. Other
, and enter 4568 as the destination port value.
For more information, see
Configure a DiffServ Class on page 184.
4. Click the Apply button.
5. On the Policy Configuration page, create a new policy with the following settings:
Policy Selector. Policy1
Member Class. Class1
For more information, see
Configure a DiffServ Policy on page 190.
342


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear GS308T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear GS308T in the language / languages: English as an attachment in your email.

The manual is 5,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear GS308T

Netgear GS308T Installation Guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info