710763
296
Zoom out
Zoom in
Previous page
1/362
Next page
S350 Series 8-Port Gigabit Ethernet Smart Managed Pro Switch Models GS308T and GS310TP
Monitor the System User Manual296
The previous figure does not show all fields on the Port Detailed Statistics page.
6. From the Interface menu, select the interface for which you want to view the statistics.
7. From the MST ID menu, select the MST ID associated with the interface (if available).
8. T
o refresh the page with the latest information about the switch, click the Update
button.
9. To clear all the counters, click the Clear
button. This resets all statistics for the port to the
default values.
The following table describes the detailed port information that displays for a particular port.
Table 60. Detailed port statistics
Field Description
ifIndex The interface or LAG.
Port Type For normal ports this field displays Normal. Otherwise, the options are as
follows:
• Mirrored.
The port is a participating in port mirroring as a mirrored port.
• Probe
. The port is a participating in port mirroring as the probe port.
• Port
Channel. The port is a member of a LAG.
Port Channel ID If the port is a member of a port channel (LAG), the port channel’
s interface ID
and name are shown. Otherwise, Disable is shown.
Port Role Each MST bridge port that is enabled is assigned a port role for each spanning
tree.
The port role is one of the following values: Root, Designated,
Alternate,
Backup, Master, or Disabled.
STP Mode The Spanning Tree Protocol administrative mode that is associated with the port
or port channel.
The options are as follows:
• Enable
. Spanning tree is enabled for the port.
• Disable. Spanning tree is disabled for the port.
STP State The port's current Spanning Tree state. This state controls what action a port
takes on receipt of a frame. If the bridge detects a malfunctioning port, it places
that port into the broken state.
The states are defined in IEEE 802.1D:
Disabled
Blocking
Listening
Learning
Forwarding
Broken
Admin Mode The port control administration state.
The port must be enabled for it to be
allowed into the network.
The default is Enabled.
Flow Control Mode Indicates whether flow control is enabled or disabled for the port.
This field does
not apply to LAGs.
LACP Mode Indicates the Link Aggregation Control Protocol administrative state. The mode
must be enabled for the port to participate in link aggregation.
Physical Mode Indicates the port speed and duplex mode. In autonegotiation mode the duplex
mode and speed are set from the autonegotiation process.
296


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear GS308T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear GS308T in the language / languages: English as an attachment in your email.

The manual is 5,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear GS308T

Netgear GS308T Installation Guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info