710763
268
Zoom out
Zoom in
Previous page
1/362
Next page
S350 Series 8-Port Gigabit Ethernet Smart Managed Pro Switch Models GS308T and GS310TP
Manage Device Security User Manual268
Configure a Basic or Extended IP ACL
An IP ACL consists of a set of rules that are matched sequentially against a packet. When a
packet meets the match criteria of a rule, the specified rule action (Permit or Deny) is taken,
and the additional rules are not checked for a match. You must specify the interfaces to
which an IP ACL applies, as well as whether it applies to inbound or outbound traffic.
Multiple steps are involved in defining an IP ACL and applying it to the switch:
1. Add an IP ACL ID (see
Add an IP ACL on page 268).
The differences between a basic IP ACL and an extended IP ACL are as follows:
Numbered ACL from 1 to 99. Creates a basic IP ACL, which allows you to permit or
deny traf
fic from a source IP address.
Numbered ACL from 100 to 199. Creates an extended IP ACL, which allows you to
permit or deny specific types of Layer 3 or Layer 4 traf
fic from a source IP address to
a destination IP address. This type of ACL provides more granularity and filtering
capabilities than the basic IP ACL.
Named IP ACL. Create an extended IP
ACL with a name string that is up to 31
alphanumeric characters in length.
The name must start with an alphabetic character.
2. Create an IP rule (see
Configure Rules for a Basic IP ACL on page 271 or Configure
Rules for an Extended IP ACL on page 275).
3. Associate the IP ACL with one or more interfaces (see
Configure IP ACL Interface
Bindings on page 282).
You can view or delete IP ACL configurations in the IP ACL Binding table (see
View or
Delete IP ACL Bindings in the IP ACL Binding Table on page 284.
Add an IP ACL
To add an IP ACL:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Discover or Change the Switch IP
Address on page 12.
ACL ID The ACL name identifying the ACL assigned to the selected interface and direction.
Sequence Number The sequence number signifying the order of the specified ACL relative to other ACLs
assigned to the selected interface and direction.
Table 55. MAC Binding Table (continued)
Field Description
268


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear GS308T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear GS308T in the language / languages: English as an attachment in your email.

The manual is 5,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear GS308T

Netgear GS308T Installation Guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info