710763
234
Zoom out
Zoom in
Previous page
1/362
Next page
S350 Series 8-Port Gigabit Ethernet Smart Managed Pro Switch Models GS308T and GS310TP
Manage Device Security User Manual234
4. Enter the switch’s password in the Password field.
The default password is password.
The System Information page displays.
5. Select Security > Port
Authentication > Advanced > Port
Authentication.
The previous figure shows only part of the page.
6. Use the horizontal scroll bar at the bottom of the page to view all the fields.
7. Select the check box next to the port.
You can also select multiple check boxes to apply the same settings to the selected ports,
or select the check box in the heading row to apply the same settings to all ports.
8. Specify the following settings:
Port Control. Defines the port authorization state. The control mode is set only if the
link status of the port is link up. Select one of the following options:
- Auto
. The switch automatically detects the mode of the interface.
- Authorized. The switch places the interface into an authorized state without
being authenticated. The interface sends and receives normal traf
fic without client
port-based authentication.
- Unauthorized. The switch denies the selected interface system access by
moving the interface into unauthorized state. The switch cannot provide
authentication services to the client through the interface.
-
MAC based. This mode allows multiple supplicants connected to the same port to
each authenticate individually. Each host connected to the port must authenticate
separately in order to gain access to the network.
The hosts are distinguished by
their MAC addresses.
Guest VLAN ID. Specify the VLAN ID for the guest VLAN.
The range is from 0 to
4093. The default value is 0. Enter 0 to reset the guest VLAN ID on the interface.
The
guest VLAN allows the port to provide a distinguished service to unauthenticated
users, after three authentication failures. This feature provides a mechanism to allow
users access to hosts on the guest VLAN.
Guest VLAN Period. Specify the time in seconds that the selected port remains in
the quiet state following a failed authentication exchange.
The guest VLAN time-out
must be a value in the range from 1 to 300. The default value is 90.
Unauthenticated VLAN ID. Specify the VLAN ID of the unauthenticated VLAN for the
selected port. The range is from 0 to 3965. The default value is 0. Hosts that fail the
authentication might be denied access to the network or placed on a VLAN created
234


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear GS308T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear GS308T in the language / languages: English as an attachment in your email.

The manual is 5,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear GS308T

Netgear GS308T Installation Guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info