710751
246
Zoom out
Zoom in
Previous page
1/302
Next page
GS108T and GS110TP Smart Switch Software Administration Manual
6-18 Monitoring the System
v1.0, April 2010
To configure the FLASH Log settings:
1. Use the radio buttons in the Admin Status field to determine whether to log messages to
persistent storage.
Enable: Enables persistent logging.
Disable: Prevents the system from logging messages in persistent storage.
2. From the Severity Filter field, specify the type of log messages to record. A log records
messages equal to or above a configured severity threshold. For example, if you select Error,
the logged messages include Error, Critical, Alert, and Emergency. The default severity level
is Alert(1). The severity can be one of the following levels:
Emergency (0): The highest level warning level. If the device is down or not functioning
properly, an emergency log is saved to the device.
Alert (1): The second highest warning level. An alert log is saved if there is a serious
device malfunction, such as all device features being down. Action must be taken
immediately.
Critical (2): The third highest warning level. A critical log is saved if a critical device
malfunction occurs, for example, two device ports are not functioning, while the rest of
the device ports remain functional.
Error (3): A device error has occurred, such as if a port is offline.
Warning (4): The lowest level of a device warning.
Notice (5): Normal but significant conditions. Provides the network administrators with
device information.
Info (6): Provides device information.
Debug (7): Provides detailed information about the log. Debugging should only be
entered by qualified support personnel.
3. If you make any changes to the page, click Apply to apply the change to the system.
The rest of the page displays the number of persistent messages the system has logged and the
persistent log messages.
Use the buttons at the bottom of the page to perform the following actions:
Click Clear to clear the messages out of the buffered log.
Click Refresh to refresh the page with the most current data from the switch.
Click Cancel to cancel the configuration on the screen and reset the data on the screen to the
latest value of the switch.
246


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear GS108Tv2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear GS108Tv2 in the language / languages: English as an attachment in your email.

The manual is 27,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear GS108Tv2

Netgear GS108Tv2 Installation Guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info