710751
235
Zoom out
Zoom in
Previous page
1/302
Next page
GS108T and GS110TP Smart Switch Software Administration Manual
Monitoring the System 6-7
v1.0, April 2010
ifIndex This field indicates the ifIndex of the interface table entry associated with this
port on an adapter.
Port Type For most ports this field is blank. Otherwise the possible values are:
Mirrored: Indicates that the port has been configured as a monitoring port
and is the source port in a port mirroring session. For additional information
about port monitoring and probe ports, see
“Multiple Port Mirroring” on
page 6-24.
Probe: Indicates that the port has been configured as a monitoring port and
is the destination port in a port mirroring session. For additional information
about port monitoring and probe ports, see
“Multiple Port Mirroring” on
page 6-24.
Port Channel: Indicates that the port has been configured as a member of a
port-channel, which is also known as a link Aggregation Group (LAG).
Port Channel ID If the port is a member of a port channel, the port channel's interface ID and
name are shown. Otherwise, Disable is shown.
Port Role Each MST Bridge Port that is enabled is assigned a Port Role for each
spanning tree. The port role will be one of the following values: Root Port,
Designated Port, Alternate Port, Backup Port, Master Port, or Disabled Port.
STP Mode Displays the Spanning Tree Protocol (STP) Administrative Mode for the port or
LAG. The possible values for this field are:
Enable: Enables the Spanning Tree Protocol for this port.
Disable: Disables the Spanning Tree Protocol for this port.
STP State Displays the port's current state Spanning Tree state. This state controls what
action a port takes on receipt of a frame. If the bridge detects a malfunctioning
port it will place that port into the broken state. The other five states are
defined in IEEE 802.1D:
Disabled
Blocking
Listening
Learning
Forwarding
Broken
Admin Mode Displays the port control administration state:
Enable: The port can participate in the network (default).
Disable: The port is administratively down and does not participate in the
network.
LACP Mode Selects the Link Aggregation Control Protocol administration state:
Enable: Specifies that the port is allowed to participate in a port channel
(LAG), which is the default mode.
Disable: Specifies that the port cannot participate in a port channel (LAG).
Table 6-3. Port Detailed Statistics Fields (continued)
Field Description
235


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear GS108Tv2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear GS108Tv2 in the language / languages: English as an attachment in your email.

The manual is 27,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear GS108Tv2

Netgear GS108Tv2 Installation Guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info