710749
30
Zoom out
Zoom in
Previous page
1/38
Next page
GS108T Smart Switch Hardware Installation Guide
A-2 Troubleshooting
v1.1, April 2010
Additional Troubleshooting Suggestions
If the suggestions in Table A-1 do not resolve your problem, refer to the troubleshooting
suggestions in this section.
Network Adapter Cards
Ensure that the network adapter cards installed in the PCs are in working condition and their most
recent software drivers have been installed.
Configuration
If problems occur after altering the network configuration, restore the original connections and
attempt to isolate the problem by implementing the most-recent changes, one step at a time. Make
sure that cable distances, repeater limits, and other physical aspects of the installation do not
exceed the Ethernet specification limitations.
Switch Integrity
If required, verify the integrity of the switch by resetting it. To do this, use the Reset button (see
Chapter 2, “Physical Description”) or remove AC power from the switch and then reapply it. If the
problem persists, contact NETGEAR technical support. In North America, call 1-888-NETGEAR.
If you are outside of North America, please refer to the support information card included with
your product.
A segment or device is
not recognized as part of
the network
One or more devices
are not properly
connected, or cabling
does not meet Ethernet
guidelines
Verify that the cabling is correct. Be sure all
connectors are securely positioned in the required
ports. Equipment may have been accidentally
disconnected
Link/ACT LED is
flashing continuously on
all connected ports and
the network is disabled
A network loop
(redundant path) has
been created
Break the loop by ensuring that there is only one path
from any networked device to any other networked
device
Table A-1. Troubleshooting Chart (continued)
Symptom Cause Solution
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear GS108Tv1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear GS108Tv1 in the language / languages: English as an attachment in your email.

The manual is 0,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear GS108Tv1

Netgear GS108Tv1 User Manual - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info