710749
27
Zoom out
Zoom in
Previous page
1/38
Next page
GS108T Smart Switch Hardware Installation Guide
Installation 4-3
v1.1, April 2010
Figure 4-1 Connecting Devices to the Switch
Connect each device to an RJ-45 network port on the switch’s front panel (see Figure 4-1) using a
Category 5 (Cat5) unshielded twisted-pair (UTP) ca
ble with RJ-45 connectors.
Note: Ethernet specifications limit the cable length between the switch and the attached
device to 100 m (328 ft.).
Step 5: Applying Power
Because the NETGEAR GS108T Gigabit Smart Switch has no ON/OFF switch, AC power must
be controlled by means of the power adapter. Select an appropriate unswitched, grounded AC
facility outlet so as to avoid any future inadvertent power interruptions. Use the following
procedure to apply AC power:
1. Connect the
female end of the supplied IEC AC power adapter cable to the power receptacle
on the back of the switch.
2. Connect the
AC power adapter cable to the DC jack.
When you apply power, the green Power LED on
the switch front panel illuminates.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear GS108Tv1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear GS108Tv1 in the language / languages: English as an attachment in your email.

The manual is 0,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear GS108Tv1

Netgear GS108Tv1 User Manual - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info