710867
40
Zoom out
Zoom in
Previous page
1/51
Next page
Manage and Monitor the Switch
40
NETGEAR ProSAFE Plus Configuration Utility
Upgrade the Firmware
You can check for the latest firmware version for your switch by visiting
downloadcenter.netgear.com, entering your product model number in the Enter a Product
Name/Model Number field, and clicking the magnifying glass to search.
Read the new firmware release notes to find out if you must reconfigure the switch after
upgrading. The firmware upgrade method depends on the current firmware and boot loader
versions on your switch.
Note: To upgrade the firmware, do not use a WiFi connection to the switch
but use only a direct wired connection over an Ethernet cable. That is,
configure a computer with an IP address in the same subnet as the
switch and connect directly to the switch using an Ethernet cable
before you start the firmware upgrade.
To upgrade the firmware:
1. Download the new firmware from the NETGEAR website.
You can check for the latest firmware version for your switch by visiting
downloadcenter.netgear.com, entering your product model number in the Enter a
Product Name/Model Number field, and clicking the magnifying glass to search.
2. Connect your computer to the same network as the switch.
Connect directly to the switch using an Ethernet cable.
3. Launch the ProSAFE Plus Utility using the desktop icon or tile.
The Switch Selection page displays a list of Web Managed (Plus) switches that it
discovers on the local network.
4. Select the switch.
If you do not see the switch, click the REFRESH button.
5. Click the APPLY button.
You are asked to enter the password for the switch.
6. Enter the switch’s password in the password field.
The switch’s default password is password.
The Switch Status page displays.
7. If the firmware release notice specifies that you must reconfigure the switch, save the switch
configuration settings.
For more information about how to save the switch configuration, see Save the Switch
Configuration on page 42.
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear GS108Ev1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear GS108Ev1 in the language / languages: English as an attachment in your email.

The manual is 1,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info