710867
8
Zoom out
Zoom in
Previous page
1/51
Next page
Get Started
8
NETGEAR ProSAFE Plus Configuration Utility
If the ProSAFE Plus Utility is unable to discover the switches in your network, make sure
that your computer’s security software allows broadcast of UDP packets to go through
UDP remote and source (local and destination) ports 63321 through 63324.
To allow this traffic, do one of the following:
Create a rule in your computer’s security software.
Temporarily disable the firewall, Internet security, antivirus programs, or all of these
programs.
5. To change the language, do the following:
a. From the Select Language menu, select your language.
A pop-up window displays.
b. Click the Yes button.
The utility relaunches.
6. Select the NETGEAR Smart Managed Plus switch that you want to configure.
If you do not see the switch, click the REFRESH button.
If the switch is connected to the Internet and you log in to the switch for the first time, the
Registration pop-up window displays. If this is not the first time that you log in, the
Registration pop-up window might display, depending on the selection that you made in
the Registration pop-up window during the previous session.
7. If the Registration pop-up window displays, select one of the following radio buttons:
Turn Off. The Registration pop-up window closes and does not display again.
However, if you restore the switch to factory default settings, the pop-up window
displays again 24 hours after the restoration.
Remind Me Later. The Registration pop-up window closes. After 24 hours, the
Registration pop-up window might display again.
Register Now. If the switch is connected to the Internet connection, the NETGEAR
website displays and you can register your product.
8. When prompted, enter the password.
The default password is password.
The Switch Information page displays.
9. Use the utility to configure the switch settings.
Specific configuration procedures are described in this manual.
10. If you temporarily disabled the firewall, Internet security, antivirus programs, or all of
these programs, return them to their usual settings when you are finished with the
configuration.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear GS108Ev1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear GS108Ev1 in the language / languages: English as an attachment in your email.

The manual is 1,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info