710804
6
Zoom out
Zoom in
Previous page
1/38
Next page
Overview
The switch provides eight Gigabit Ethernet copper ports and two dedicated Gigabit
SFP fiber ports. All copper ports use RJ-45 connectors. The SFP ports require a standard
small form-factor pluggable (SFP) gigabit interface converter (GBIC, also referred to as
transceiver module), which is sold separately from the switch. The switch integrates
full-duplex, nonblocking switch fabric that provides full-wire speed for all packet sizes.
The PoE model supports PoE on all copper ports with a maximum PoE power budget
of 62W across all active PoE ports.
Note: For information about application examples, see Applications on page 18.
The switch provides management options that let you discover the switch on the network
and configure, monitor, and control the switch:
NETGEAR Insight app. Using the NETGEAR Insight app, you can discover the switch
on the network and add the switch to the NETGEAR Insight app so that you can
perform basic management and monitoring tasks from your smartphone. You can
choose from four methods to add the switch to the NETGEAR Insight app: You can
scan the serial number bar code of the switch, add the switch from the Day Zero
window, add the switch from the Network window, or add the switch from the Device
List window. For more information, see the NETGEAR knowledge base articles at
support.netgear.com.
Local browser–based management interface. Using the local browser–based
management interface, in this guide referred to as the local browser interface, you
can perform very advanced configurations and, if needed, debugging. For more
information, see the user manual, which you can download from
downloadcenter.netgear.com.
Note: The switch is designed to be managed using the NETGEAR Insight app. By
default, the local browser interface is disabled and you cannot use it to manage the
switch while the NETGEAR Insight app is enabled to manage the switch.
You can install the switch freestanding (on a desktop) or wall-mounted, using the
VESA-standard mounting holes and supplied wall-mount kit. The switch is IEEE compliant
and offers low latency. All ports can automatically negotiate to the highest speed, which
makes the switch very suitable for a mixed environment with Gigabit Ethernet and Fast
Ethernet.
For Gigabit Ethernet connections, use Category 5e (Cat 5e) or higher-rated Ethernet
cables terminated with RJ-45 connectors.
Hardware Installation Guide6Introduction
Insight Managed 8-Port Gigabit Ethernet Smart Cloud Switch with 2 SFP Fiber Ports
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear GC110P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear GC110P in the language / languages: English as an attachment in your email.

The manual is 1,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear GC110P

Netgear GC110P Installation Guide - English - 2 pages

Netgear GC110P User Manual - English - 416 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info