710804
397
Zoom out
Zoom in
Previous page
1/416
Next page
Configuration Examples
397
Insight Managed 8-Port Gigabit Ethernet Smart Cloud Switch with 2 SFP Fiber Ports
Policing with color mode awareness. Policing in the DiffServ feature uses either color
blind or color aware mode. Color blind mode ignores the coloration (marking) of the
incoming packet. Color aware mode takes into consideration the current packet marking
when the switch determines the policing outcome. An auxiliary traffic class is used in
conjunction with the policing definition to specify a value for one of the 802.1p, secondary
802.1p, IP DSCP, or IP precedence fields designating the incoming color value to be
used as the conforming color. You can also specify the color of traffic that exceeds the
threshold.
Counting. Updating octet and packet statistics to keep track of data handling along traffic
paths within DiffServ. In this DiffServ feature, counters are not explicitly configured by the
user, but are designed into the system based on the DiffServ policy being created. For
more information, see View DiffServ Service Statistics on page 236.
Assigning QoS queue. Directs a traffic stream to the specified QoS queue. This allows a
traffic classifier to specify which one of the supported hardware queues are used for
handling packets belonging to the class.
Redirecting. Forces a classified traffic stream to a specified egress port (physical or
LAG). This can occur in addition to any marking or policing action. It can also be specified
along with a QoS queue assignment.
DiffServ Example Configuration
To create a DiffServ class and policy and attach them to a switch interface, follow these
steps:
1. On the Class Configuration page (see Create and Configure a DiffServ Class on
page 218), create a new class with the following settings:
Class Name. Class1
Class Type. All
2. Click the Class1 hyperlink to view the DiffServ Class Configuration page for this class.
3. Configure the following settings for Class1:
Protocol Type. UDP
Source IP Address. 192.12.1.0.
Source Mask. 255.255.255.0.
Source L4 Port. Other, and enter 4567 as the source port value.
Destination IP Address. 192.12.2.0.
Destination Mask. 255.255.255.0.
Destination L4 Port. Other, and enter 4568 as the destination port value.
For more information about this page, see Create and Configure a DiffServ Class on
page 218.
4. Click the Apply button.
397


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear GC110P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear GC110P in the language / languages: English as an attachment in your email.

The manual is 1,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear GC110P

Netgear GC110P User Manual - English - 38 pages

Netgear GC110P Installation Guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info