710804
10
Zoom out
Zoom in
Previous page
1/416
Next page
Getting Started
10
Insight Managed 8-Port Gigabit Ethernet Smart Cloud Switch with 2 SFP Fiber Ports
Switch Management Options and Default Management
Mode
If you prefer, you can use the switch as a plug-and-play device, so you do not need to set up
a custom configuration. Just connect power, connect to your network and to your other
devices, and you’re done.
The switch is designed for management by the NETGEAR Insight app on a smartphone or
tablet. Alternatively, you can manage the switch from the Insight Cloud portal that is available
from a web browser on your Windows-based computer, Mac, or tablet. By default, the local
browser interface is disabled and you cannot use it while the switch is managed by the
NETGEAR Insight app or Insight Cloud portal.
The switch provides management options that let you discover the switch on the network and
configure, monitor, and control the switch:
NETGEAR Insight app. Using the NETGEAR Insight app, you can discover the switch
on the network and add the switch to the NETGEAR Insight app so that you can set up
the switch in the network and manage and monitor the switch remotely from your
smartphone.You can choose from four methods to add the switch to the NETGEAR
Insight app: You can scan your network for the switch, scan the QR code or the barcode
of the switch, or add the serial number of the switch. For more information, visit
netgear.com/insight and see the NETGEAR knowledge base articles at
netgear.com/support.
Insight Cloud portal. Using the NETGEAR Insight Cloud portal, you can set up the
switch in the network, perform advanced remote setup, configuration, and management,
monitor the switch, analyze the switch and network usage, and, if necessary, troubleshoot
the switch and the network.
Local browser interface. By default, the management mode of the switch is set to
NETGEAR Insight Mobile App and Insight Cloud Portal. With this setting you can manage
the switch using the Insight app or the Insight Cloud portal. For complex tasks such as
integrating with an existing network of devices that are not managed through Insight, and
for debugging purposes, you can change the management mode of the switch to Direct
Connect Web-browser Interface and access the local browser interface. In this mode, you
can change the settings of the specific device, but we recommend that you do not use
this mode to change settings that are Insight manageable because they would not be
synchronized with Insight or to the network location and other devices to which you
assigned the switch.
Note: Changes to Insight-manageable settings from the local browser
interface might also create conflicts with the rest of the
Insight-managed network to which the device is connected. While you
manage the switch with the local browser interface, you cannot use
the Insight app or Insight Cloud portal. To reenable management of
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear GC110P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear GC110P in the language / languages: English as an attachment in your email.

The manual is 1,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear GC110P

Netgear GC110P User Manual - English - 38 pages

Netgear GC110P Installation Guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info