710805
370
Zoom out
Zoom in
Previous page
1/416
Next page
Monitor the System
370
Insight Managed 8-Port Gigabit Ethernet Smart Cloud Switch with 2 SFP Fiber Ports
STP State The port's current Spanning Tree state. This state controls what action a port
takes on receipt of a frame. If the bridge detects a malfunctioning port, it places
that port into the broken state. The states are defined in IEEE 802.1D:
Disabled
Blocking
Listening
Learning
Forwarding
Broken
Admin Mode The port control administration state:
Enable. The port can participate in the network (default).
Disable. The port is administratively down and does not participate in the
network.
Flow Control Mode Indicates whether flow control is enabled or disabled for the port. This field is not
valid for LAG interfaces.
LACP Mode
The Link Aggregation Control Protocol (LACP) administration state, which is one
of the following:
Enable. The port is allowed to participate in a LAG, which is the default
mode.
Disable. The port cannot participate in a LAG.
Physical Mode The port speed and duplex mode. In autonegotiation mode, the duplex mode
and speed are set by the autonegotiation process.
Physical Status The port speed and duplex mode.
Link Status Indicates whether the link is up or down.
Link Trap Indicates whether or not the port sends a trap when link status changes:
Enable. The switch sends a trap when the link status changes.
Disable. The switch does not send a trap when the link status changes.
Packets RX and TX 64 Octets The total number of packets (including bad packets) received and transmitted
that were 64 octets in length (excluding framing bits but including FCS octets).
Packets RX and TX 65-127
Octets
The total number of packets (including bad packets) received and transmitted
that were between 65 and 127 octets in length inclusive (excluding framing bits
but including FCS octets).
Packets RX and TX 128-255
Octets
The total number of packets (including bad packets) received and transmitted
that were between 128 and 255 octets in length inclusive (excluding framing bits
but including FCS octets).
Packets RX and TX 256-511
Octets
The total number of packets (including bad packets) received and transmitted
that were between 256 and 511 octets in length inclusive (excluding framing bits
but including FCS octets).
Table 87. Detailed port statistics (continued)
Field Description
370


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear GC110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear GC110 in the language / languages: English as an attachment in your email.

The manual is 1,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info