710805

Netgear GC110 Manual

266
Zoom out
Zoom in
Previous page
1/416
Next page
Manage Device Security
266
Insight Managed 8-Port Gigabit Ethernet Smart Cloud Switch with 2 SFP Fiber Ports
8. Specify the following settings:
• Port Control. Defines the port authorization state. The control mode is set only if the
link status of the port is link up. Select one of the following options:
- Auto. The switch automatically detects the mode of the interface.
- Authorized. The switch places the interface into an authorized state without being
authenticated. The interface sends and receives normal traffic without client
port-based authentication.
- Unauthorized. The switch denies the selected interface access by moving the
interface into unauthorized state. The switch cannot provide authentication
services to the client through the interface.
- MAC based. Multiple supplicants connected to the same port are allowed to be
authenticated individually. Each host connected to the port must de authenticated
separately to gain access to the network. The hosts are distinguished by their
MAC addresses.
• MAB. Specify whether to enable or disable MAC-based Authentication Bypass (MAB)
for 802.1x-unaware clients at the specified port. MAB only functions if the port control
mode is MAC-based. By default, MAB is disabled.
• Guest VLAN ID. Specify the VLAN ID for the guest VLAN. The valid range is 0–4093.
The default value is 0. Enter 0 to reset the guest VLAN ID on the interface. The guest
VLAN allows the port to provide a distinguished service to unauthenticated users.
This feature provides a mechanism to allow users access to hosts on the guest VLAN.
• Guest VLAN Period. Specify the number of seconds that the selected port remains in
the quiet state following a failed authentication exchange. The guest VLAN time-out
must be a value in the range of 1–300. The default value is 90.
• Unauthenticated VLAN ID. Specify the VLAN ID of the unauthenticated VLAN for the
selected port. The valid range is 0–3965. The default value is 0. Hosts that fail the
authentication might be denied access to the network or placed on a VLAN created
for unauthenticated clients. This VLAN might be configured with limited network
access.
• Periodic Reauthentication. Select Enable to allow periodic reauthentication of the
supplicant for the specified port.
• Reauthentication Period. Specify the time, in seconds, after which reauthentication
of the supplicant occurs. The reauthentication period must be a value in the range of
1–65535. The default value is 3600. If this field is disabled, connected clients are not
forced to reauthenticate periodically.
• Quiet Period. Specify the number of seconds that the port remains in the quiet state
following a failed authentication exchange. While in the quite state, the port does not
attempt to acquire a supplicant.
• Resending EAP. Specify the EAP retransmit period for the selected port. The
transmit period is the value, in seconds, after which an EAPoL EAP Request/Identify
frame is resent to the supplicant.
• Max EAP Requests. Specify the maximum number of EAP requests for the selected
port. The value is the maximum number of times an EAPoL EAP Request/Identity
message is retransmitted before the supplicant times out.
… 266 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear GC110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear GC110 in the language / languages: English as an attachment in your email.

The manual is 1,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info