710897
138
Zoom out
Zoom in
Previous page
1/185
Next page
FS728TP Smart Switch FS728TP Smart Switch Software Administration Manual
Managing Security 6-17
v1.0, December 2007
Max Entries – Enter the maximum number of MAC addresses that can be learned on the
port. The Max Entries field is enabled only if the Limited Dynamic Lock mode is selected.
The range is 1-128 entries. The default value is 1.
Action – Select the action to be applied to packets arriving on a locked port. The possible
field values are:
Forward – Forwards packets from an unknown source without learning the MAC
address.
Discard – Discards packets from any unlearned source. This is the default value.
Shutdown – Discards packets from any unlearned source and shuts down the port. The
port remains shut down until reactivated or until the device is reset.
Trap – Select whether traps are enabled or disabled when a packet from an unknown
source is received on a locked port. The possible field values are:
Enable – Enable traps.
Disable – Disable traps. This is the default value.
Trap Frequency (Sec) – Enter the frequency at which traps are sent. The field format is in
seconds. The range is 1-1,000,000. The default value is 10 seconds.
2. Select the port security Status, Learning Mode, Action and Trap status from the lists in the
provided fields in the first row.
3. Enter the Max Entries and Trap Frequency in the provided fields in the first row.
4. Click Apply to update the device.
ACL
Access Control Lists (ACL) allow network managers to define classification actions and rules for
specific ingress ports. Packets entering an ingress port, with an active ACL, are either admitted or
denied entry and the ingress port is disabled. If they are denied entry, the user can disable the port.
The ACL menu contains the following options:
“MAC ACL”
“MAC Rules”
“MAC Binding Configuration”
“IP ACL”
138


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear FS728TPv1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear FS728TPv1 in the language / languages: English as an attachment in your email.

The manual is 3,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info