710897

Netgear FS728TPv1 Manual

133
Zoom out
Zoom in
Previous page
1/185
Next page
FS728TP Smart Switch FS728TP Smart Switch Software Administration Manual
6-12 Managing Security
v1.0, December 2007
• Port Control – Select the port authorization state.
– Auto – The port control is Auto and a single client has been authenticated via the port.
– Authorized – The port control is Forced Authorized, and clients have full port access.
– Unauthorized – Either the port control is force Unauthorized, or the port control is
Auto but a client has not been authenticated via the port.
• Guest VLAN – Select whether the Guest VLAN is enabled or disabled on the port. The
default VLAN cannot be defined as a Guest VLAN. The possible field values are:
– Enable – Enable using a Guest VLAN for unauthorized ports. If a Guest VLAN is
enabled, the unauthorized port automatically joins the VLAN selected in the VLAN
List field.
– Disable – Disable the Guest VLAN on the port. This is the default value.
• Periodic Reauthentication – Select whether periodic port reauthentication is enabled or
disabled. The possible field values are:
– Enable – Enable periodic port reauthentication.
– Disable – Disable port reauthentication. This is the default value.
• Reauthentication Period – Enter the time span (in seconds) in which the selected port is
reauthenticated. The field default is 3600 seconds.
• Authenticator State – Displays whether immediate port reauthentication is enabled or
disabled. The possible field values are:
– Enable – Immediate port reauthentication is enabled.
– Disable – Immediate port reauthentication is disabled. This is the default value.
• Quiet Period – Enter the number of seconds that the device remains in the quiet state
following a failed authentication exchange. The possible field range is 0-65535. The field
default is 60 seconds.
• Resending EAP – Enter the amount of time (in seconds) that lapses before EAP requests
are resent. The field default is 30 seconds.
• Max EAP Requests – Enter the total amount of EAP requests sent. If a response is not
received after the defined period, the authentication process is restarted. The field default
is 2 retries.
• Supplicant Timeout – Enter the amount of time (in seconds) that lapses before EAP
requests are resent to the supplicant. The field default is 30 seconds.
… 133 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear FS728TPv1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear FS728TPv1 in the language / languages: English as an attachment in your email.

The manual is 3,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info