710897
97
Zoom out
Zoom in
Previous page
1/185
Next page
FS728TP Smart Switch FS728TP Smart Switch Software Administration Manual
4-28 Configuring Switching Settings
v1.0, December 2007
Port State – Displays the current STP state of a port. If enabled, the port state determines
what forwarding action is taken on traffic. Possible port states are:
Forwarding – STP is enabled on the port, and the port is forwarding packets based on
the STP topology.
Disabled – STP is currently disabled on the port. The port forwards traffic while
learning MAC addresses.
Blocking – The port is currently blocked and cannot forward traffic or learn MAC
addresses. Blocking is displayed when STP is enabled.
Listening – The port is in Listening mode. The port cannot forward traffic nor can it
learn MAC addresses.
Learning – The port is in Learning mode. The port cannot forward traffic, however it
can learn new MAC addresses.
Speed – Displays the speed at which the port is operating.
Path Cost – Enter the method used to assign default path cost to STP ports. The possible
field range is 1 - 200000000. The default path cost assigned to an interface varies
according to the selected method.
Priority – Enter the port priority value. When switches or ports are running STP, each is
assigned a priority. After exchanging BPDUs, the device with the lowest priority value
becomes the Root Port. The default value is 32768. The port priority value is provided in
increments of 4096.
2. Select the STP Status and Fast Link status in the provided fields.
3. Enter the Path Cost and Priority in the provided fields.
4. Click Apply to update the device.
Multicast
Multicast forwarding allows a single packet to be forwarded to multiple destinations. L2 Multicast
service is based on L2 switch receiving a single packet addressed to a specific Multicast address.
Multicast forwarding creates copies of the packet, and transmits the packets to the relevant ports.
Registered Multicast traffic – If traffic addressed to a registered Multicast group is seen it is
handled by an entry in the Multicast Filtering Database and forwarded only to the registered
ports.
97


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear FS728TPv1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear FS728TPv1 in the language / languages: English as an attachment in your email.

The manual is 3,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info