479749
30
Zoom out
Zoom in
Previous page
1/150
Next page
Reference Manual for the Model FR114P, FR114W and FM114P Cable/DSL ProSafe Firewall
2-6 Setting Up the Hardware
Preparing your Wireless Devices
For the FM114P Wireless Firewall with Print Server, rotate the antenna to a vertical position and
tighten the base.
Installing a Wireless Card in the FR114W
The FR114W Wireless-Ready Firewall can be upgraded to wireless operation by purchasing and
installing a NETGEAR Model MA401 802.11b Wireless PC Card. The FR114W will function
normally without a wireless adapter card, but will not have wireless connectivity. To install the
MA401 Wireless PC Card in your FR114W, follow these steps:
1. Locate the wireless adapter card slot on the rear panel.
2. Remove the rubber dust cover from the slot.
3. Slide the MA401 card into the slot with the card’s front label and LED facing up.
4. Be sure that the MA401 card is securely seated into the internal connector.
The blue plastic end cap of the MA401card should be outside of the FR114W’s case.
Initial Configuration of Your Wireless PCs
Detailed instructions on configuring your wireless devices for TCP/IP networking are provided in
the next chapter. However, if you already have a functioning wireless network and you wish to use
a wireless PC to initially configure the firewall, you will need to change the settings of that PC to
match the default settings of the firewall:
The SSID should be Wireless (note the capitalization).
WEP encryption is disabled.
Your IP address must be in the range of 192.168.0.2 to 192.168.0.254, with a netmask of
255.255.255.0.
Connecting the Power Adapter
To connect the firewall to the power adapter:
1. Plug the connector of the power adapter into the power adapter outlet on the rear panel of the
firewall.
2. Plug the other end of the adapter into a standard wall outlet.
3. Verify that the Power LED on the firewall is lit.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear FM114P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear FM114P in the language / languages: English as an attachment in your email.

The manual is 1,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info