479749
21
Zoom out
Zoom in
Previous page
1/150
Next page
Reference Manual for the Model FR114P, FR114W and FM114P Cable/DSL ProSafe Firewall
Introduction 1-3
High-speed Parallel Port Connection
36 pin Centronics, bi-directional IEEE 1284 compliant (supports Nibble mode) with up to
1.5Mbps transfer rate
Content Filtering
With its content filtering feature, the NETGEAR ProSafe Firewall prevents objectionable content
from reaching your PCs. The firewall allows you to control access to Internet content by screening
for keywords within Web addresses. You can configure the firewall to log and report attempts to
access objectional Internet sites.
Configurable Ethernet Connection
With its internal 4-port 10/100 switch, the NETGEAR ProSafe Firewall can connect to either a 10
Mbps standard Ethernet network or a 100 Mbps Fast Ethernet network. The local LAN interface is
autosensing and is capable of full-duplex or half-duplex operation. An uplink switch is provided
for cascading to an external Ethernet hub or switch.
Protocol Support
The NETGEAR ProSafe Firewall supports the Transmission Control Protocol/Internet Protocol
(TCP/IP) and Routing Information Protocol (RIP).
For further information about TCP/IP, refer to Appendix B, “Networks, Routing, and Firewall
Basics.”
IP Address Sharing by NAT
The NETGEAR ProSafe Firewall allows several networked PCs to share an Internet account
using only a single IP address, which may be statically or dynamically assigned by your
Internet service provider (ISP). This technique, known as Network Address Translation
(NAT), allows the use of an inexpensive single-user ISP account.
Automatic Configuration of Attached PCs by DHCP
The NETGEAR ProSafe Firewall dynamically assigns network configuration information,
including IP, gateway, and domain name server (DNS) addresses, to attached PCs on the LAN
using the Dynamic Host Configuration Protocol (DHCP). This feature greatly simplifies
configuration of PCs on your local network.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear FM114P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear FM114P in the language / languages: English as an attachment in your email.

The manual is 1,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info