479727
54
Zoom out
Zoom in
Previous page
1/62
Next page
Digital Entertainer Model EVA700 User Manual
5-4 Troubleshooting
v1.0, May 2006
Wireless Link
Please be aware that wireless data rate and throughput decreases as the distance
increases between the Access Point (AP) and the digital entertainer. If you are
unable to detect any wireless networks, try the following:
Your wireless AP (access point) may be too far from the digital entertainer. It
may be necessary to move either the AP or the digital entertainer so that they
are closer together.
If you are using a wireless connection between the AP (or wireless router) and
the computer that serves the media content, you might also need to move the
computer and the AP closer together.
If your access point is configured to disable broadcast of SSID, the digital
entertainer will not be able to detect it. You must manually configure your
wireless settings as described in “WiFi Setup” on page 4-5.
The digital entertainer cannot connect to the wireless network while it is
connected to the Ethernet network. Disconnect your Ethernet cable.
For detailed information about wireless networks, see the link to this topic listed
in “Wireless Communications:” in Appendix B.
IP Address
If the digital entertainer does not receive a valid IP address, try the following:
Verify that a working DHCP server is on your network. PCs on the network
should get IP addresses in the correct range.
If the digital entertainer is set to use DHCP and fails to obtain an IP Address
from the server, it will resort to an auto IP Address in the range of
169.254.x.x. You can use a Static IP Address if there is a problem connecting
to the server.
If you are using a wireless network, verify that the digital entertainer is
associated with the correct SSID. The SSID that is being used can be
displayed by following instructions in “WiFi Setup” on page 4-5.
If you are using a wireless network, verify that the WEP settings on the digital
entertainer match the settings on your access point. This must match the
setting on your access point. For information about WEP, see the link listed in
“Wireless Communications:” on page B-1.
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear EVA700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear EVA700 in the language / languages: English as an attachment in your email.

The manual is 3,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info